Amval

Uses

Amval is used for the treatment of hypertension. This combination drug is not used for the initial therapy of hypertension.

Amval is also used to associated treatment for these conditions: Anginal Pain, Cardiovascular Events, Chronic Stable Angina Pectoris, Coronary Artery Disease (CAD), High Blood Pressure (Hypertension), Homozygous Familial Hypercholesterolemia, Hypertension,Essential, Mixed Dyslipidemias, Primary Hypercholesterolemia, Vasospastic AnginaCardiovascular Mortality, Diabetic Nephropathy, High Blood Pressure (Hypertension), Left Ventricular Dysfunction, Moderate Essential Hypertension, Chronic heart failure with reduced ejection fraction (NYHA Class II), Chronic heart failure with reduced ejection fraction (NYHA Class III), Chronic heart failure with reduced ejection fraction (NYHA Class IV), Hospitalization due to cardiac failure

How Amval works

Mechanism of action on blood pressure

Amlodipine is considered a peripheral arterial vasodilator that exerts its action directly on vascular smooth muscle to lead to a reduction in peripheral vascular resistance, causing a decrease in blood pressure. Amlodipine is a dihydropyridine calcium antagonist (calcium ion antagonist or slow-channel blocker) that inhibits the influx of calcium ions into both vascular smooth muscle and cardiac muscle. Experimental studies imply that amlodipine binds to both dihydropyridine and nondihydropyridine binding sites, located on cell membranes. The contraction of cardiac muscle and vascular smooth muscle are dependent on the movement of extracellular calcium ions into these cells by specific ion channels. Amlodipine blocks calcium ion influx across cell membranes with selectivity. A stronger effect of amlodipine is exerted on vascular smooth muscle cells than on cardiac muscle cells . Direct actions of amlodipine on vascular smooth muscle result in reduced blood pressure .

Mechanism of action in angina

The exact mechanism by which amlodipine relieves the symptoms of angina have not been fully elucidated to this date, however, the mechanism of action is likely twofold:

Amlodipine has a dilating effect on peripheral arterioles, reducing the total peripheral resistance (afterload) against which the cardiac muscle functions. Since the heart rate remains stable during amlodipine administration, the reduced work of the heart reduces both myocardial energy use and oxygen requirements .

Dilatation of the main coronary arteries and coronary arterioles, both in healthy and ischemic areas, is another possible mechanism of amlodipine reduction of blood pressure. The dilatation causes an increase in myocardial oxygen delivery in patients experiencing coronary artery spasm (Prinzmetal's or variant angina) and reduces coronary vasoconstriction caused by smoking .

Valsartan belongs to the angiotensin II receptor blocker (ARB) family of drugs, which selectively bind to angiotensin receptor 1 (AT1) and prevent angiotensin II from binding and exerting its hypertensive effects. These include vasoconstriction, stimulation and synthesis of aldosterone and ADH, cardiac stimulation, and renal reabsorption of sodium among others. Overall, valsartan's physiologic effects lead to reduced blood pressure, lower aldosterone levels, reduced cardiac activity, and increased excretion of sodium.

Valsartan also affects the renin-angiotensin aldosterone system (RAAS), which plays an important role in hemostasis and regulation of kidney, vascular, and cardiac functions. Pharmacological blockade of RAAS via AT1 receptor blockade inhibits negative regulatory feedback within RAAS which is a contributing factor to the pathogenesis and progression of cardiovascular disease, heart failure, and renal disease. In particular, heart failure is associated with chronic activation of RAAS, leading to inappropriate fluid retention, vasoconstriction, and ultimately a further decline in left ventricular function. ARBs have been shown to have a protective effect on the heart by improving cardiac function, reducing afterload, increasing cardiac output and prevent ventricular hypertrophy.

The angiotensin-converting enzyme inhibitor (ACEI) class of medications (which includes drugs such as ramipril, lisinopril, and perindopril) inhibits the conversion of angiotensin I to angiotensin II by inhibiting the ACE enzyme but does not prevent the formation of all angiotensin II. ARB activity is unique in that it blocks all angiotensin II activity, regardless of where or how it was synthesized.

Valsartan is commonly used for the management of hypertension, heart failure, and type 2 diabetes-associated nephropathy, particularly in patients who are unable to tolerate ACE inhibitors. ARBs such as valsartan have been shown in a number of large-scale clinical outcomes trials to improve cardiovascular outcomes including reducing risk of myocardial infarction, stroke, the progression of heart failure, and hospitalization. Valsartan also slows the progression of diabetic nephropathy due to its renoprotective effects. Improvements in chronic kidney disease with valsartan include both clinically and statistically significant decreases in urinary albumin and protein excretion in patients diagnosed with type 2 diabetes and in nondiabetic patients diagnosed with chronic kidney disease.

Valsartan also binds to the AT2 receptor, however AT2 is not known to be associated with cardiovascular homeostasis like AT1. Valsartan has about 20,000-fold higher affinity for the AT1 receptor than for the AT2 receptor. The increased plasma levels of angiotensin II following AT1 receptor blockade with valsartan may stimulate the unblocked AT2 receptor.

Dosage

Amval dosage

Amlodipine is an effective treatment of hypertension in once daily doses of 2.5 mg to 10 mg while Valsartan is effective in doses of 80 mg to 320 mg. The majority of the antihypertensive effect is attained within 2 weeks after initiation of therapy or a change in dose. The dosage can be increased after 1 to 2 weeks of therapy to a maximum of one 10/320 mg tablet once daily as needed to control blood pressure.

Amval may be administered with or without food. Amval may be administered with other antihypertensive agents. A patient whose blood pressure is not adequately controlled with Amlodipine alone or with Valsartan alone may be switched to their combination therapy.

Elderly patients: Because of decreased clearance of Amlodipine, therapy should usually be initiated at 2.5 mg.

Renal impairment: No initial dosage adjustment is required for patients with mild or moderate renal impairment. Titrate slowly in patients with severe renal impairment.

Hepatic impairment: No initial dosage adjustment is required for patients with mild or moderate liver insufficiency. Titrate slowly in patients with hepatic impairment.

Administration of Valsartan with food decreases the absorption of Valsartan by about 40%, so it should be taken on an empty stomach. No initial dosage adjustment is required for elderly patients with mild to moderate renal and hepatic insufficiency.

Side Effects

The most common side effects include peripheral edema, vertigo, nasopharyngitis, upper respiratory tract infection and dizziness.

Toxicity

Acute oral toxicity (LD50): 37 mg/kg (mouse) .

Overdose

An overdose of amlodipine could result in a high degree of peripheral vasodilatation with a possibility of reflex tachycardia. Significant and prolonged hypotension leading to shock and fatal outcomes have been reported .

Carcinogenesis, mutagenesis, impairment of fertility

Rats and mice treated with amlodipine maleate in the diet on a long-term basis for up to 2 years demonstrated no evidence of a carcinogenic effect of the drug. For the mouse, the highest dose was comparable to the maximum recommended human dose of 10 mg amlodipine per day. For the rat, the highest dose was measured to be about twice the maximum recommended human dose .

Mutagenicity studies using amlodipine maleate showed no drug-related gene or chromosomal effects .

There was no impact on the fertility of rats given oral amlodipine maleate (males for 64 days and females for 14 days before mating) at doses up to 10 mg amlodipine/kg/day (8 times the maximum recommended human dose) .

Use in pregnancy

The safety of amlodipine in human pregnancy or lactation has not been proven. Amlodipine is therefore considered a pregnancy category C drug . Use amlodipine only if the potential benefit justifies the potential risk .

Use in nursing

Discontinue when administering amlodipine .

Approximate LD50 >2000 mg/kg (Gavage, rat) [F3139]

Reproductive Toxicology Studies

No teratogenic effects were seen when valsartan was given to pregnant mice and rats at oral doses up to 600 mg/kg/day and to pregnant rabbits at oral doses reaching up to 10 mg/kg/day. Despite this, marked decreases in fetal weight, pup birth weight, pup survival rate, and delays in developmental milestones were noted in studies in which parental rats were treated with valsartan at oral, maternally toxic doses of 600 mg/kg/day during the organogenesis period or during late gestation and lactation.[F4607]

Pregnancy

When used in pregnancy, drugs that act directly on the renin-angiotensin system (RAAS) can cause injury and death to the developing fetus. When pregnancy is detected, valsartan should be discontinued as soon as possible.[F4607]

Precaution

Amval should be used with caution because there is a risk for-

fetal or neonatal morbidity

hypotension

myocardial infarction or increased angina

Dose should be titrated slowly in patients with impaired hepatic or severely impaired renal function. In general, calcium channel blockers should be used with caution in patients with heart failure.

Interaction

No drug interaction studies have been conducted with Amlodipine and Valsartan combination and other drugs, although studies have been conducted with the individual Amlodipine and Valsartan components

Volume of Distribution

21 L/kg , .

The steady state volume of distribution of valsartan after intravenous administration is small (17 L), indicating that valsartan does not distribute into tissues extensively.[F3139,F3607]

Elimination Route

Amlodipine absorbed slowly and almost completely from the gastrointestinal tract. Peak plasma concentrations are achieved 6-12 hours after oral administration. The estimated bioavailability of amlodipine is 64-90%. Steady-state plasma amlodipine levels are achieved after 7-8 days of consecutive daily dosing. Absorption is not affected by food .

After one oral dose, the antihypertensive activity of valsartan begins within approximately 2 hours and peaks within 4-6 hours in most patients.[F3139] Food decreases the exposure to orally administered valsartan by approximately 40% and peak plasma concentration by approximately 50%. AUC and Cmax values of valsartan genereally increase linearly with increasing dose over the therapeutic dose range. Valsartan does not accumulate appreciably in plasma following repetitive administration.[F4607]

Half Life

The terminal elimination half-life of about 30–50 hours .

Plasma elimination half-life is 56 hours in patients with impaired hepatic function, titrate slowly when administering this drug to patients with severe hepatic impairment .

After intravenous (IV) administration, valsartan demonstrates bi-exponential decay kinetics, with an average elimination half-life of about 6 hours.[F4607]

Clearance

Total body clearance (CL) has been calculated as 7 ± 1.3 ml/min/kg (0.42 ± 0.078 L/ h/kg) in healthy volunteers , .

Elderly patients show a reduced clearance of amlodipine with an AUC (area under the curve) increase of about 40–60%, and a lower initial dose may be required .

Following intravenous administration, plasma clearance of valsartan is approximately 2 L/hour and its renal clearance is 0.62 L/hour (about 30% of total clearance).[F4607]

Elimination Route

Elimination from the plasma occurs in a biphasic with a terminal elimination half-life of about 30–50 hours. Steady-state plasma levels of amlodipine are reached after 7-8 days of consecutive daily dosing . Amlodipine is 10% excreted as unchanged drug in the urine. Amlodipine can be initiated at normal doses in patients diagnosed with renal failure , .

Valsartan, when administered as an oral solution, is primarily recovered in feces (about 83% of dose) and urine (about 13% of dose). The recovery is mainly as unchanged drug, with only about 20% of dose recovered as metabolites.[F4607]

Pregnancy & Breastfeeding use

Pregnancy: Amlodipine and Valsartan combination should not be used in 2nd and 3rd trimester because it can cause fetal death .

Nursing Mothers: It is not known whether Valsartan and Amlodipine are excreted in human milk. Because of the potential for adverse effects on the nursing infant, a decision should be made whether to discontinue nursing or discontinue the drug, taking into account the importance of the drug to the mother.

Contraindication

Amlodipine and Valsartan combination is contraindicated in patients who are hypersensitive to any compounds of this product.

Pediatric use: The safety and effectiveness has not been established in pediatric patients.

Geriatric use: No differences in overall incidence of adverse events were observed in elderly.

Special Warning

Pediatric use: The safety and effectiveness has not been established in pediatric patients.

Geriatric use: No differences in overall incidence of adverse events were observed in elderly.

Renal impairment: No initial dosage adjustment is required for patients with mild or moderate renal impairment. Titrate slowly in patients with severe renal impairment.

Hepatic impairment: No initial dosage adjustment is required for patients with mild or moderate liver insufficiency. Titrate slowly in patients with hepatic impairment.

Acute Overdose

Limited data of human overdosage have been reported.

Storage Condition

Store in a cool dry place protected from light. Keep out of reach of children.

Innovators Monograph

You find simplified version here Amval