Axepime
Axepime Uses, Dosage, Side Effects, Food Interaction and all others data.
Axepime Hydrochloride is a preparation of Axepime. It is a fourth generation broad-spectrum cephalosporin antibiotic. Axepime acts by inhibition of bacterial cell wall synthesis. It is highly resistant to hydrolysis by most beta-lactamases and exhibits rapid penetration into gram-negative bacterial cells.
Axepime has been shown to be active against most strains of the following microorganisms:
Gram-Positive Microorganisms:
Staphylococcus aureus, Streptococcus pneumoniae, Streptococcus pyogenes, Viridans group streptococci, Staphylococcus epidermidis, Staphylococcus saprophyticus, Staphylococcus hominis, Streptococcus agalactiae.
Gram-Negative Microorganisms:
Enterobacter, Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, Pseudomonas aeruginosa, Acinetobacter calcoaceticus, Citrobacter diversus, Citrobacter freundii, Enterobacter spp., Haemophilus influenzae (including beta-lactamase producing strains), Haemophilus parainfluenzae, Hafnia alvei, Klebsiella oxytoca, Moraxella catarrhalis (including beta-lactamase producing strains), Morganella morganii, Proteus vulgaris, Providencia rettgeri, Providencia stuartii, Serratia marcescens, Neisseria meningitidis.
Anaerobes:
Trade Name | Axepime |
Availability | Prescription only |
Generic | Cefepime |
Cefepime Other Names | Cefepima, Cefepime, Cefepimum |
Related Drugs | amoxicillin, doxycycline, ciprofloxacin, cephalexin, metronidazole, azithromycin, clindamycin, ceftriaxone, levofloxacin, Augmentin |
Weight | 1 gm/vial, 1gm, 500mg |
Type | Im/iv Injection, Injection |
Formula | C19H24N6O5S2 |
Weight | Average: 480.561 Monoisotopic: 480.124959288 |
Protein binding | The serum protein binding of cefepime is approximately 20% and is independent of its concentration in serum. |
Groups | Approved, Investigational |
Therapeutic Class | Fourth generation Cephalosporins |
Manufacturer | Euro Pharma Ltd, Eg Pharmaceuticals |
Available Country | Bangladesh, Pakistan |
Last Updated: | September 19, 2023 at 7:00 am |
Uses
Axepime Hydrochloride is used for the treatment of the following infections:
• Pneumonia (moderate to severe)
• Uncomplicated and Complicated Urinary Tract Infections (including pyelonephritis)
• Uncomplicated Skin and Skin Structure Infections
• Complicated Intra-abdominal Infections
• Empiric Therapy for Febrile Neutropenic Patients.
Axepime is also used to associated treatment for these conditions: Bacterial Infections, Complicated Intra-Abdominal Infections, Complicated Urinary Tract Infection, Febrile Neutropenia, Meningitis, Bacterial, Pyelonephritis, Severe Pneumonia, Uncomplicated Urinary Tract Infections, Moderate Pneumonia, Uncomplicated skin and subcutaneous tissue bacterial infections
How Axepime works
Cephalosporins are bactericidal and have the same mode of action as other beta-lactam antibiotics (such as penicillins). Cephalosporins disrupt the synthesis of the peptidoglycan layer of bacterial cell walls. The peptidoglycan layer is important for cell wall structural integrity, especially in Gram-positive organisms. The final transpeptidation step in the synthesis of the peptidoglycan is facilitated by transpeptidases known as penicillin binding proteins (PBPs).
Dosage
Axepime dosage
Recommended dosage schedule for adults with normal renal function
Type of Infection Dose Frequency Duration (Days)
Moderate to severe Pneumonia 1-2 g IV q12h 10
Empiric Therapy for Febrile Neutropenic Patients 2 g IV q8h 7
Mild to moderate Uncomplicated or Complicated Urinary 0.5-1 g IV/IM q12h 7-10
Tract Infections (including pyelonephritis)
Severe Uncomplicated or Complicated Urinary 2 g IV q12h 10
Tract Infections (including pyelonephritis)
Moderate to severe Uncomplicated Skin and Skin Structure 2 g IV q12h 10
Infections
Complicated Intra-abdominal Infections 2 g IV q12h 7-10
Pediatric Patients (2 months up to 16 years)
The maximum dose for pediatric patients should not exceed the recommended adult dose.
Type of Infection Pediatric patients up to 40 kg in weight
Dose Frequency Duration
(Days)
Uncomplicated and Complicated Urinary Tract Infections 50 mg/kg q12h 7-10
(including pyelonephritis)
Uncomplicated Skin and Skin Structure Infections 50 mg/kg q12h 10
Pneumonia 50 mg/kg q12h 10
Febrile Neutropenic Patients 50 mg/kg q8h 7
Impaired Hepatic Function - No adjustment is necessary for patients with impaired hepatic function.
Impaired Renal Function - In patients with impaired renal function (creatinine clearance <60 ml/min), the dose of Axepime should be adjusted. The recommended initial dose of Axepime should be the same as in patients with normal renal function except in patients undergoing hemodialysis. The recommended doses of Axepime in patients with renal insufficiency are presented in the following table:
Creatinine Clearance Recommended Maintenance Schedule
(ml/min)
>60 500 mg q12h 1g q12h 2g q12h 2g q8h
Normal recommended
dosing schedule
30-60 500 mg q24h 1g q24h 2g q24h 2g q12h
11-29 500 mg q24h 500 mg q24h 1g q24h 2g q24h
<11 250 mg q24h 250 mg q24h 500 mg q24h 1g q24h
CAPD 500 mg q48h 1g q48h 2g q48h 2g q48h
Hemodialysis 1g on day 1, then 500 mg q24h thereafter 1g q24h
Preparation of Solutions of Axepime Hydrochloride
Single-dose vial Administration Amount of diluent to be added
500 mg IM 1.3 ml
500 mg IV 5 ml
1 gm IM 2.4 ml
1 gm IV 10 ml
These solutions may be stored up to 24 hours at room temperature or 7 days in a refrigerator.
Axepime Hydrochloride is compatible at concentrations between 1 and 40 mg/ml with the following IV infusion fluids: (1) 0.9% Sodium chloride, (2) 5% and 10% Dextrose.
IV infusion: Add 5 mL, 10 mL, or 10 mL of a compatible IV soln to a vial labeled as containing 500 mg, 1 g, or 2 g, respectively, to provide soln containing approx 100 mg/mL, 100 mg/mL, or 160 mg/mL of the drug, respectively. The appropriate dose of the drug should then be added to a compatible IV soln.
IM inj: Add 1.3 mL or 2.4 mL of an appropriate diluent (e.g. sterile water for inj, NaCl 0.9%) to a vial labeled as containing 500 mg or 1 g respectively, to provide a soln containing approx 280 mg/mL.
Side Effects
Generally Axepime is well tolerated. However, few side-effects including rash, pruritus, urticaria, fever, headache, nausea, vomiting, diarrhea, dizziness, oral moniliasis may occur.
Toxicity
Symptoms of overdose include seizures, encephalopathy, and neuromuscular excitability.
Precaution
In patients with impaired renal function (creatinine clearance <60 ml/min), the dose of Axepime should be adjusted. Axepime should be prescribed with caution in individuals with a history of gastrointestinal diseases, particularly colitis.
Interaction
Increased potential for nephrotoxicity and ototoxicity of aminoglycosides. Increased risk of nephrotoxicity with potent diuretics (e.g. furosemide).
Food Interaction
No interactions found.Axepime Drug Interaction
Moderate: furosemide, furosemideUnknown: ciprofloxacin, ciprofloxacin, apixaban, apixaban, sodium chloride, sodium chloride, acetaminophen, acetaminophen, pantoprazole, pantoprazole, acetaminophen, acetaminophen, cyanocobalamin, cyanocobalamin, cholecalciferol, cholecalciferol, ondansetron, ondansetron
Axepime Disease Interaction
Major: colitisModerate: renal dysfunction, dialysis, liver disease, seizure disorders
Volume of Distribution
- 18.0 ±2.0 L
- 0.3 ±0.1 L/kg [Pediatric]
Elimination Route
The absolute bioavailability of cefepime after an IM dose of 50 mg/kg was 82.3 (±15)% in eight patients.
Half Life
2.0 (± 0.3) hours in normal patients. The average half-life in patients requiring hemodialysis was 13.5 (± 2.7) hours and in patients requiring continuous peritoneal dialysis was 19.0 (± 2.0) hours.
Clearance
- 120 mL/min [Healthy adult male receiving a single 30-minute IV infusions of cefepime]
- 3.3 +/-1.0 mL/min/kg [Petriatic patients (2 months – 11 years of age) receiving a single IV dose]
Elimination Route
Elimination of cefepime is principally via renal excretion with an average (±SD) half-life of 2 (±0.3) hours and total body clearance of 120 (±8) mL/min in healthy volunteers. Axepime is excreted in human milk.
Pregnancy & Breastfeeding use
Pregnancy: There are no adequate and well-controlled studies of Axepime use in pregnant women. Axepime should be used during pregnancy only if clearly needed.
Lactation: Axepime is excreted in human breast milk in very low concentrations. Caution should be exercised when Axepime is administered to a nursing woman.
Contraindication
Hypersensitivity to cefepime or other cephalosporins.
Acute Overdose
Patients who receive an overdose should be carefully observed and given supportive treatment. Symptoms of overdose include encephalopathy (disturbance of consciousness including confusion, hallucinations, stupor, and coma), myoclonus, seizures, and neuromuscular excitability.
Interaction with other Medicine
Renal function should be monitored carefully if high doses of aminoglycosides are to be administered with Axepime because of the increased potential of nephrotoxicity and ototoxicity of aminoglycoside antibiotics. Nephrotoxicity has been reported following concomitant administration of other cephalosporins with potent diuretics such as furosemide.
Storage Condition
Axepime Hydrochloride should be stored in a cool & dry place and protected from light.
Innovators Monograph
You find simplified version here Axepime
Axepime contains Cefepime see full prescribing information from innovator Axepime Monograph, Axepime MSDS, Axepime FDA label
FAQ
What is Axepime used for?
Axepime is a fourth-generation cephalosporin antibiotic. Axepime has an extended spectrum of activity against Gram-positive and Gram-negative bacteria, with greater activity against both types of organism than third-generation agents. Axepime also used in the treatment of various bacterial infections caused by susceptible bacteria, such as pneumonia, urinary tract infections, and skin infections.
How safe is Axepime?
The safety profile of Axepime is excellent and comparable to that of Axepime and those reported for other cephalosporins.
How does Axepime work?
Axepime works by killing bacteria or preventing their growth.
What are the common side effects of Axepime?
Common side effects of Axepime are include:
- Abdominal or stomach cramps
- back, leg, or stomach pains
- bleeding gums, nosebleeds
- confusion
- convulsions
- dark urine
- difficulty with breathing
- fever, chills
- general body swelling
- headache
- irregular heartbeats
- loss of appetite
- mood or mental changes
- muscle cramps in the hands, arms, feet, legs, or face
- nausea or vomiting
- numbness and tingling around the mouth, fingertips, or feet
- tremor
- yellowing of the eyes or skin
Is Axepime safe during pregnancy?
Axepime should be used during pregnancy only if clearly needed. The Axepime group is generally considered safe for use during pregnancy, but each drug is slightly different and may have different side effects.
Is Axepime safe during breastfeeding?
Axepime is acceptable in nursing mothers.
Can I drink alcohol with Axepime?
Using alcohol with certain medicines may also cause interactions to occur.
Can I drive after taking Axepime?
Axepime generally does not cause any problems with your ability to drive a car or operate machinery.
When should be best taken of Axepime?
Axepime are supposed to be taken on an empty stomach should be taken about an hour before a meal, or 2 hours after a meal.
How should be taken of Axepime ?
Axepime injection can also be given intramuscularly. It is usually given every 8 or 12 hours for 7 to 10 days. A healthcare provider can teach you how to properly use the medication by yourself.
How long does Axepime take to work?
Axepime takes about six to eight hours for food to pass through your stomach and small intestine.
What is the half-life of Axepime?
The half-life of Axepime was approximately 2.3 hours.
Can Axepime cause kidney failure?
Patients with renal failure who are treated with Axepime has been reported sporadically.
Who should not take Axepime ?
You should not use this Axepime if you are allergic to Axepime or other cephalosporin antibiotic.
What happens if I miss a dose?
Use the Axepime as soon as you can, but skip the missed dose if it is almost time for your next dose. Do not use two doses at one time.
Can I take Axepime for a long time?
Continue to use this Axepime for the full time prescribed, even if symptoms disappear after a few days. Stopping the Axepime too early may result in a return of the infection.
Is Axepime bad for liver?
Axepime is considered well-tolerated and is associated with few adverse reactions. Although Axepime -induced neurotoxicity and nephrotoxicity have been reported in recent years, there are currently no formal reports of hepatic injury caused by this Axepime.
How long can I take Axepime?
Use this Axepime for the full prescribed length of time, even if your symptoms quickly improve. Some infections must be treated for up to 6 weeks.
Can I overdose on Axepime?
Axepime related neurological toxicity has been associated with overdosing due to severe renal dysfunction.
How often can I take Axepime?
Axepime is usually given every 8 or 12 hours for 7 to 10 days.
What happens if I miss a dose?
Use the medicine as soon as you can, but skip the missed dose if it is almost time for your next dose. Do not use two doses at one time.