PriBC 0.1%
PriBC 0.1% Uses, Dosage, Side Effects, Food Interaction and all others data.
PriBC 0.1% chloride is a quaternary ammonium antiseptic and disinfectant. It is also used as an antimicrobial preservative for pharmaceutical products. It is also used for the disinfection of rigid contact lenses.
PriBC 0.1% chloride solutions are generally categorized as biocidal agents with relative long durations of action. Their spectrum of activity has been demonstrated against bacteria, to some viruses, fungi, and protozoa , although bacterial spores are treated as being resistant to the agent. Additionally, the agent generally shows more activity against gram-positive than gram-negative bacteria . Finally, solutions of benzalkonium chloride are bacteriostatic or bactericidal based on their concentration. Bacteriostatic agents act to prevent further growth of bacterial organisms that are present while bactericidal agents function to kill bacteria that are present . In general, the activity of the agent is not largely affected by pH, but such activity does increase substantially at higher temperatures and prolonged exposure times.
Trade Name | PriBC 0.1% |
Generic | Benzalkonium |
Type | |
Groups | Approved, Investigational |
Therapeutic Class | Bleaching and Disinfectants |
Manufacturer | |
Available Country | Japan |
Last Updated: | September 19, 2023 at 7:00 am |
Uses
Higher concentrations of PriBC 0.1% chloride is used as an antiseptic and disinfectant. This is also widely used as a preservative in eye-drops.
PriBC 0.1% is also used to associated treatment for these conditions: Diaper Dermatitis, Dry Eye Syndrome (DES), Eye and eyelid infections, Gingivitis, Hemorrhoids, Infantile Eczema, Mouth irritation, Pruritus Ani, Tonsillitis, Throat inflammation, Antisepsis, Disinfection therapy, Eye disinfection, Eye lubrication, Hand Hygiene, Skin disinfection, Wound treatment
How PriBC 0.1% works
Although not entirely elucidated, the bactericidal action of benzalkonium chloride is believed to be due to the disruption of intermolecular interactions. Such disruption can cause the dissociation of cellular membrane lipid bilayers of bacteria, resulting in compromised cellular permeability control and the leakage of important cellular contents. Additionally, other important molecular complexes like enzymes which control the maintenance of a great range of respiratory and metabolic cellular activities, are also susceptible to such deactivation. Consequently, a variety of critical intermolecular interactions and tertiary structures in very highly specific biochemical systems that allow bacterial agents to function normally can be readily disrupted or deactivated by cationic surfactants like benzalkonium chloride. .
Dosage
PriBC 0.1% dosage
- Tincture of benzalkonium chloride 1:750 is used for the preoperative disinfection of unbroken skin or treatment of superficial injuries.
- For preoperative disinfection of mucous membranes and denuded skin, benzalkonium chloride solution in concentrations of 1:10000 to 1:2000 is used.
- For irrigation of the eye, a solution of 1:10000 to 1:5000 is used.
- For urinary bladder and urethral irrigation, a solution 1:5000 to 1:20000 is used.
- For vaginal douche and irrigation, benzalkonium chloride solution 1:5000 to 1:20000.
Side Effects
Repeated application may cause hypersensitivity reactions. May cause nausea and vomiting if ingested.
Toxicity
An oral dose of 100-400 mg/kg or a parenteral dose of 5-15 mg/kg is believed to be fatal in humans .
A potential concern for larger concentrations of benzalkonium chloride to possibly cause corneal damage when implemented as an excipient ingredient in aqueous eye products is an issue that should be discussed between potential patents and their health care providers . Since decreased regular blinking and tear generation in patients experiencing dry eyes due to any number of eye conditions can result in reduced dilution of applied eye drops containing the benzalkonium chloride preservative , alternative options including benzalkonium chloride-free products should be considered.
Additionally, benzalkonium chloride has been reported to cause punctate keratopathy and/or toxic ulcerative keratopathy. In addition, benzalkonium chloride may cause eye irritation and is known to discolour soft contact lenses . There may also be the possibility of benzalkonium chloride containing eye drops to cause some stinging and pain .
There is the possibility of ototoxicity occurring when benzalkonium chloride containing ear drops are applied to the ear .
PriBC 0.1% chloride used as a preservative in nebulised solutions of anti-asthma drugs has been reported to cause dose-related bronchoconstriction especially in asthmatic patients and has been associated with the precipitation of respiratory arrest .
Despite the fairly widespread cutaneous use of benzalkonium chloride, only limited human evidence of sensitization in relatively small populations of individuals have been reported . Nevertheless, the main adverse effect for topical formulations of benzalkonium chloride is usually the warning 'may cause local irritation' .
Interaction
Disinfectants containing quaternary ammonium salts should not be used for skin preparation before injections of viscoelastic solutions. Hyaluronic acid will precipitate in the presence of these salts.
Food Interaction
No interactions found.Volume of Distribution
When applied as a topical antibacterial, antiseptic, disinfectant, or sanitizer it is believed that molecules of benzalkonium chloride are poorly absorbed (perhaps due to their large, positively charged nature ), especially considering expectations for such topical applications to keep their biocidal agents available for action at the topical level and to not be absorbed significantly beyond it.
When benzalkonium chloride is implemented as an excipient preservative ingredient in various eye, nose, and ear aqueous products, such products will always have other active pharmacological agents whose volume of distribution will be of greater importance. In these cases the excipients will only ever be present at the minimal levels necessary to maintain the integrity of the product substance.
Moreover, PriBC 0.1% chloride is currently listed as a Category III ingredient by the United States Food and Drug Administration . Ingredients are listed in the FDA Category III when the data available about them are insufficient to classify as safe and effective, requiring further testing to determine more formal details about elements like human pharmacokinetic studies, and studies on the ingredients' absorption, distribution, metabolism, and excretion.
Elimination Route
Percutaneous absorption is considered to be insignificant .
In one study, benzalkonium chloride absorption was evaluated in women using tampons containing the agent. Venous blood samples were drawn 15 minutes before the tampon application and then again at 15 min, 1 h, 3 h, and 24 h after application. PriBC 0.1% chloride was not detected in any of the blood samples at any time tested.
Similarly, in another study, benzalkonium chloride absorption was tested in women using tampons containing the agent. Venous blood and breast milk samples were taken 15 minutes before application and 3 h and 24 h after tampon administration. PriBC 0.1% chloride was not found in any of the subjects' samples. .
Moreover, in a study where benzalkonium chloride solution was placed on the corneal surface of rabbit subjects, at various intervals after administration, the rabbits' eyes would be washed with 1 mL saline and the following tissues and fluids were removed: bulbar and palpebral conjunctiva, aqueous humour, corneal epithelium, endothelium and stroma, iris-ciliary body, lens, vitreous, retina, and choroid. Plasma samples were obtained with direct cardiac punctures. After administration of one drop, benzalkonium chloride was found in the corneal epithelium, endothelium, and stroma, and in the bulbar and palpebral conjunctivae. PriBC 0.1% chloride loss from ocular tissues was such that about one-third to two thirds of its concentration (depending on the tissue) at 30 min remained after 24 hr; measurable values existed for as long as 120 hr. The administration of multiple drops led to continued accumulation of benzalkonium chloride. .
Elimination Route
Administered benzalkonium chloride is likely eliminated largely in faeces, similar to other quaternary ammonium compounds .
Contraindication
Incompatible with soaps and other anionic surfactants, citrates, iodides, nitrates, permanganates, salicylates, silver salts, tartrates, and zinc oxide and sulfate.
Storage Condition
Keep below 30°C temperature, away from light & moisture. Keep out of the reach of children.
Innovators Monograph
You find simplified version here PriBC 0.1%